Kia Navi Update | Schnell und einfach aktualisieren! | navicheck.de (2024)

FAQs

How long does it take to update Kia Navigation system? ›

A - Turn off Bluetooth in your Navigation system to prevent any interruption or failure. Take photo of your current System Info, SW Version, and Map Version. Follow the step by step instructions. The update may take anywhere from 30 minutes for newer car to as much as three hours for older vehicles.

You can update latest map and software by downloading the Navigation Updater program from internet site (http://update.kia.com) and through USB. For details on update, check from internet site and carry out. Press [HOME] button or [1] > [Setup] > [System Info] > [Software Information].

1. Soft Reset – Find the pinhole on your Navigation system and use a paper clip or bobby pin to press this button and reset. 2. Hard Reset – Disconnect your vehicle's battery for 30 minutes.

Yes the engine should be running during the update in order to keep the vehicle battery from dying.

While an update is being performed, you can't drive your vehicle and the center display may remain active during the update. Park in a safe and secure location before beginning any update. Generally, software installation takes about 20 minutes or less.

System & Map update is Free when you choose to download it.

However, Kia has a notification system for critical updates, if your vehicle is enrolled in Kia Connect and your vehicle is equipped with Over-the-Air Software Update capabilities. Notifications are sent to you when an update is ready to install. 1. A message will appear on your vehicle's infotainment screen.

But things do change slowly over time. Roads get rerouted or changed for safety, streets get renamed, bridges get replaced, traffic patterns are modified. So, if you use the navigation system often, and drive a lot in unfamiliar places, then it's probably worth updating every four or five years.

Make sure that the battery of your device is fully charged. Your navigation device is not working correctly and needs to be reset. In some cases, if the software on your navigation device is not working as expected, you may need to reset the device. See how to reset your device here .

How do I reset my Navigation system? ›

Press and hold down the audio system power button for at least 10 seconds. Use a paper clip or ballpoint pen to press the “system reset button.” The exact location varies by model and year, but it's a small and unmarked hole that's often near the volume knob. Wait a few minutes for the system to power back on.

Hard Reset – Disconnect your vehicle's battery for 30 minutes. WARNING: You will lose your saved settings.

In addition to offering the software upgrade for free at all of its dealerships, the automaker is continuing to host drive-in clinics where owners in major cities nationwide can bring their cars to have the software upgrade installed.

As a general rule of thumb, it's a good idea to run an update your sat nav once every three to six months. Even if you don't travel far with your sat nav, it's still a good idea to update it as road layouts change quickly and you don't want to be adding time onto your journey for no reason.

Buyers of eligible new vehicles get Over-the-Air Infotainment and Navigation software updates with their one-year free trial of the Kia Connect Ultimate package. After the trial ends, the owner must be a paid Ultimate plan subscriber.

Installing USB updates can take up to 45 minutes. For Wi-Fi updates, the download time can vary from a few hours to multiple days depending on internet-related factors (Wi-Fi strength, internet speeds, time connected to Wi-Fi network, etc.).

If you have a vehicle from MY22 onwards with software less than six months old, OTA updates will operate automatically. There are two updates a year and you'll get your first two updates free of charge.