** Z-Score in statistics** is a measurement of how many standard deviations away a data point is from the mean of a distribution. A z-score of 0 indicates that the data point’s score is the same as the mean score. A positive z-score indicates that the data point is above average, while a negative z-score indicates that the data point is below average.

It provides a way to compare individual data points across different distributions by standardizing the values, allowing for meaningful comparisons even when the original data sets have different means and standard deviations.

**What is Z-Score?**

**What is Z-Score?**

** Z-score, **also known as the

**,**

**standard score****by expressing it in terms of standard deviations above or below the mean. It gives us an idea of how far a data point is from the mean. Hence, the Z-Score is measured in terms of standard deviation from the mean. For example, a**

**tells us the deviation of a data point from the mean****standard deviations**

**Z-score of 2 indicates the value is 2****. To use a z-score, we need to know the population mean (μ) and also the population standard deviation (σ).**

**away from the mean**

Z-score is a statistical measure that describes a value’s position relative to the mean of a group of values. It is expressed in terms of standard deviations from the mean. The Z-score indicates how many standard deviations an element is from the mean.

**Z-Score Formula**

**Z-Score Formula**

To calculate the z- score for any given data we need the value of the element along with the mean and standard deviation. A z-score can be calculated using the following Z- score formula.

## z = (X – μ) / σ

where,

- z = Z-Score
- X = Value of Element
- μ = Population Mean
- σ = Population Standard Deviation

**How to Calculate Z-Score?**

**How to Calculate Z-Score?**

We are given the population mean (μ), the population standard deviation (σ), and the observed value (x) by substituting these values in the z- score formula we can calculate the Z-Score value. Depending upon whether the given Z-Score is positive or negative, we can use positive Z-Table or negative Z-Table available online or on the back of your statistics textbook in the appendix.

**Example 1:You take the GATE examination and score 500. The mean score for the GATE is 390 and the standard deviation is 45. How well did you score on the test compared to the average test taker?**

Solution:Following data is readily available in the above question statement

Raw score/observed value = X = 500

Mean score = μ = 390

Standard deviation = σ = 45

By applying the z-score formula ,

z = (X – μ) / σ

z = (500 – 390) / 45

z = 110 / 45 = 2.44

This means that your z-score is

.2.44Since the Z-Score is positive 2.44, we will make use of the positive Z-Table.

Now let’s take a look at Z Table (CC-BY) to know how well you scored compared to the other test-takers.

Follow the instruction below to find the probability from the table.

Here,

whichz-score = 2.44,ndicates that the data point is 2.44 standard deviations above the mean.i

- Firstly, map the first two digits 2.4 on the Y-axis.
- Then along the X-axis, map 0.04
- Join both axes. The intersection of the two will provide you the cumulative probability associated with the Z-score value you’re looking for

[This probability represents the area under the standard normal curve to the left of the Z-score]

Normal distribution table

As a result, you will get the final value which is

.0.99266Now, we need to compare how our original score of 500 on the GATE examination compares to the average score of the batch. To do that we need to convert the cumulative probability associated with the Z-score into a percentage value.

0.99266 × 100 = 99.266%Finally, you can say that you have performed well than almost

of other test-takers.99%

**Example 2: What is the probability that a student scores between 350 and 400 (with a mean score μ of 390 and a standard deviation σ of 45)?**

**Solution:**

Min score = X

_{1}= 350Max score = X

_{2}= 400By applying the z-score formula ,

z

_{1}= (X1 – μ) / σz

_{1}= (350 – 390) / 45z

_{1 }= -40 / 45 = -0.88z

_{2}= (X_{2}– μ) / σz2 = (400 – 390) / 45

z

_{2}= 10 / 45 = 0.22Since z1 is negative, we will have to look at a negative Z-Table and find that cumulative probability p1, the first probability, is

.0.18943See AlsoZ-Score: Meaning and FormulaWas ist der z-score? | Data Basecampt-Test, Chi-Square, ANOVA, Regression, Correlation...How To Understand And Calculate Z-Scores – mathsathome.comz

_{2}is positive, so we use a positive Z-Table which yields a cumulative probability p_{2}of.0.58706The final probability is computed by subtracting p1 from p

_{2}:p= p

_{2}– p_{1}p = 0.58706 – 0.18943 = 0.39763

The probability that a student scores between 350 and 400 is

(0.39763 * 100).39.763%

## How to interpret Z- score

: A Z-score of 0 indicates that the data point is exactly at the mean of the distribution.**Z-Score = 0**: A positive Z-score indicates that the data point is above the mean. For example, a Z-score of 1.5 means the data point is 1.5 standard deviations above the mean.**Positive Z-Score**: A negative Z-score indicates that the data point is below the mean. For example, a Z-score of -2 means the data point is 2 standard deviations below the mean.**Negative Z-Score**: The magnitude of the Z-score shows how far away the data point is from the mean. A larger absolute value of the Z-score indicates that the data point is farther from the mean, while a smaller absolute value indicates it is closer.**Magnitude of Z-Score**:**Common Thresholds**: Often considered unusual or significant, indicating the data point is more than 2 standard deviations away from the mean.**Z-Score > 2 or < -2**: Typically considered an outlier, suggesting the data point is extremely far from the mean.**Z-Score > 3 or < -3**

## Properties of Z-Score

- The magnitude of the Z-score reflects how far a data point is from the mean in terms of standard deviations.
- An element having a z-score of less than 0 represents that the element is less than the mean.
- Z-scores allow for the comparison of data points from different distributions.
- An element having a z-score greater than 0 represents that the element is greater than the mean.
- An element having a z-score equal to 0 represents that the element is equal to the mean.
- An element having a z-score equal to 1 represents that the element is 1 standard deviation greater than the mean; a z-score equal to 2, 2 standard deviations greater than the mean, and so on.
- An element having a z-score equal to -1 represents that the element is 1 standard deviation less than the mean; a z-score equal to -2, 2 standard deviations less than the mean, and so on.
- If the number of elements in a given set is large, then about 68% of the elements have a z-score between -1 and 1; about 95% have a z-score between -2 and 2; about 99% have a z-score between -3 and 3. This is known as the Empirical Rule, and it states the percentage of data within certain standard deviations from the mean in a normal distribution as demonstrated in the image below

The empirical rule in Normal distribution

## Calculate Outliers Using the Z-Score Value

We can calculate outliers in the data using the z-score value of the data points. The steps to consider an outlier data point are as:

- At first, we gather the dataset in which we want to see the outliers
- We will calculate the mean and standard deviation of the dataset, These values will be used to calculate the z-score value of each data point.
- We will calculate the z-score value for each data point. The formula for calculating the z-score value will be the same as

[Tex]Z = \frac{{X – \mu}}{{\sigma}}[/Tex]

where X will be the data point, μ is the mean of the data, and σ is the standard deviation of the dataset. - We will determine the cutoff value for the z-score after which the data point could be considered as an outlier. This cutoff value is a hyperparameter that we decide depending on our project.
- A data point whose z-score value is greater than 3 means the data point does not belong to the 99.73 % point of the dataset.
- Any data point whose z-score is greater than our decided cutoff value will be considered an outlier.

** Also Check: **Z score for Outlier Detection – Python

## Solved Examples on Z-score Formula

### Example 1: Basic Z-score calculation

Mean (μ) = 70

Standard deviation (σ) = 5

Data point (x) = 80

Z-score formula: Z = (x – μ) / σ

Solution:

Z = (80 – 70) / 5

Z = 10 / 5

Z = 2

This means the data point is 2 standard deviations above the mean.

### Example 2: Z-score with negative result

Mean (μ) = 100

Standard deviation (σ) = 15

Data point (x) = 85

Solution:

Z- score formula : Z = (x – μ) / σ

Z = (85 – 100) / 15

Z = -15 / 15

Z = -1

This means the data point is 1 standard deviation below the mean.

### Example 3: What percentage of people have a lower IQ than this person having an IQ of 130 ?

**Mean IQ (μ) = 100, Standard deviation (σ) = 15, Person’s IQ (x) = 130**

Calculate Z-score:

Z = (130 – 100) / 15 = 2

Use a standard normal distribution table or calculator to find the area to the left of Z = 2.

Area = 0.9772

Convert to percentage:

97.72% of people have a lower IQ than this person.

### Example 4: Finding the corresponding height for a given a Z-score

**Mean height (μ) = 170 cm, Standard deviation (σ) = 8 cm, Z-score = -1.5**

Use the Z-score formula and solve for x:

-1.5 = (x – 170) / 8

-12 = x – 170

x = 158 cm

The height corresponding to a Z-score of -1.5 is 158 cm.

### Example 5: Z-score in a dataset

A dataset of exam scores: 75, 82, 90, 68, 95

Calculate the Z-score for 82.

Step 1: Calculate the mean (μ)

μ = (75 + 82 + 90 + 68 + 95) / 5 = 82

Step 2: Calculate the standard deviation (σ)

σ = √[Σ(x – μ)² / (n-1)]

σ = √[((-7)² + 0² + 8² + (-14)² + 13²) / 4]

σ = √(466 / 4) = √116.5 ≈ 10.79

Step 3: Calculate the Z-score for 82

Z = (82 – 82) / 10.79 = 0

Explanation: The Z-score of 0 indicates that 82 is exactly at the mean of the dataset.

### Example 6: Comparing scores from different distributions

**Alice scored 130 on an IQ test with μ = 100 and σ = 15**

**Bob scored 28 on an aptitude test with μ = 20 and σ = 5**

### Who performed better relative to their test’s distribution?

Alice’s Z-score: Z_A = (130 – 100) / 15 = 2

Bob’s Z-score: Z_B = (28 – 20) / 5 = 1.6

Explanation: Alice performed better relative to her test’s distribution because her Z-score (2) is higher than Bob’s (1.6).

### Example 7: Using Z-score for probability Scores on a standardized test are normally distributed with μ = 500 and σ = 100 calculate the probability of scoring above 650?

Step 1: Calculate the Z-score for 650

Z = (650 – 500) / 100 = 1.5

Step 2: Find the area to the right of Z = 1.5 in a standard normal distribution table

Area = 1 – 0.9332 = 0.0668

Explanation: The probability of scoring above 650 is approximately 0.0668 or 6.68%.

### Example 8: Z-score for sample means

A population has μ = 50 and σ = 10. We take samples of size n = 25.

Question: What’s the Z-score for a sample mean of 53?

Step 1: Calculate the standard error of the mean

SE = σ / √n = 10 / √25 = 2

Step 2: Calculate the Z-score using the standard error

Z = (x̄ – μ) / SE = (53 – 50) / 2 = 1.5

Explanation: This Z-score tells us how many standard errors the sample mean is from the population mean. A Z-score of 1.5 indicates that the sample mean of 53 is 1.5 standard errors above the population mean.

## Practice Problems on Z-score Formula

**Problems 1. In a normal distribution with a mean of 50 and a standard deviation of 10, what is the Z-score for a value of 65?**

**Problems 2. A dataset has a mean of 100 and a standard deviation of 15. Calculate the Z-score for a value of 85.**

**Problems 3. The weights of adult males in a population are normally distributed with a mean of 180 pounds and a standard deviation of 30 pounds. What weight corresponds to a Z-score of 1.5?**

**Problems 4. IQ scores are normally distributed with a mean of 100 and a standard deviation of 15. What percentage of people have an IQ above 130?**

**Problems 5. A company’s employee satisfaction scores have a mean of 7.5 and a standard deviation of 1.2. If an employee’s satisfaction score has a Z-score of -0.8, what is their actual score?**

**Problems 6. In a normal distribution, what percentage of data falls between Z-scores of -1 and +1?**

**Problems 7. A student scores 78 on a test where the mean is 70 and the standard deviation is 8. Calculate the student’s Z-score.**

**Problems 8. The heights of a group of plants are normally distributed with a mean of 25 cm and a standard deviation of 3 cm. What height corresponds to the 90th percentile?**

**Problems 9. A dataset has the following values: 2, 4, 6, 8, 10. Calculate the Z-score for the value 8.**

**Problems 10. A machine produces parts with a mean length of 15 cm and a standard deviation of 0.5 cm. If a part is considered defective when its Z-score is greater than 2 or less than -2, what are the acceptable length ranges for the parts?**

## Implementation of Z-Score in Python

We can use Python to calculate the z-score value of data points in the dataset. Also, we will use the numpy library to calculate mean and standard deviation of the dataset.

import numpy as npdef calculate_z_score(data): # Mean of the dataset mean = np.mean(data) # Standard Deviation of tha dataset std_dev = np.std(data) # Z-score of tha data points z_scores = (data - mean) / std_dev return z_scores# Example dataset dataset = [3,9, 23, 43,53, 4, 5,30, 35, 50, 70, 150, 6, 7, 8, 9, 10]z_scores = calculate_z_score(dataset)print('Z-Score :',z_scores)# Data points which lies outside 3 standard deviatioms are outliers # i.e outside range of99.73% valuesoutliers = [data_point for data_point, \ z_score in zip(dataset, z_scores) if z_score > 3]print(f'\nThe outliers in the dataset is {outliers}')

**Output:**

Z-Score : [-0.7574907 -0.59097335 -0.20243286 0.35262498 0.6301539 -0.72973781

-0.70198492 -0.00816262 0.13060185 0.54689523 1.10195307 3.32218443

-0.67423202 -0.64647913 -0.61872624 -0.59097335 -0.56322046]

The outliers in the dataset is [150]

## Application of Z-Score

- Z-scores are often used for feature scaling to bring different features to a common scale. Normalizing features ensures that they have zero mean and unit variance, which can be beneficial for certain machine learning algorithms, especially those that rely on distance measures.
- Z-scores can be used to identify outliers in a dataset. Data points with Z-scores beyond a certain threshold (usually 3 standard deviations from the mean) may be considered outliers.
- Z-scores can be used in anomaly detection algorithms to identify instances that deviate significantly from the expected behaviour.
- Z-scores can be applied to transform skewed distributions into more normal distributions.
- When working with regression models, Z-scores of residuals can be analysed to check for hom*oscedasticity (constant variance of residuals).
- Z-scores can be used in feature scaling by looking at their standard deviations from the mean.

## Z-Scores vs. Standard Deviation

Z- Score | ## Standard Deviation |
---|---|

Transform raw data into a standardized scale. | Measures the amount of variation or dispersion in a set of values. |

Makes it easier to compare values from different datasets because they take away the original units of measurement. | Standard Deviation retains the original units of measurement, making it less suitable for direct comparisons between datasets with different units. |

Indicate how far a data point is from the mean in terms of standard deviations, providing a measure of the data point’s relative position within the distribution | Expressed in the same units as the original data, providing an absolute measure of how spread out the values are around the mean |

** Check: **Z-Score Table

## Applications of Z-Scores in Engineering

### 1. Standardization

Z-scores are used to standardize data, allowing comparison between different datasets with different units or scales.

### 2. Identifying Outliers

Z-scores help in detecting outliers in a dataset, which are values significantly higher or lower than the rest.

### 3. Statistical Testing

In hypothesis testing, Z-scores are used to determine the significance of results by comparing observed data to a standard normal distribution.

### 4. Quality Control

In manufacturing and quality control, Z-scores help monitor process performance and product quality by comparing measurements to specifications.

### 5. Finance

In finance, Z-scores are used in risk management and investment analysis to evaluate the relative performance of assets.

## Why are Z-scores Called Standard Scores?

** Z-scores** are also known as

**This means that the list of standardized scores has a mean of 0 and a standard deviation of 1.0.**

**standard scores because they standardize the value of a random variable.****also**

**Z-scores****. This is because they use relative standing to equate scores from different variables or distributions.**

**allow for the comparison of scores on different kinds of variables**Z-scores are frequently used to compare a variable to a standard normal distribution (with μ = 0 and σ = 1).

### Related Articles:

- Z-Score in Statistics
- Z-Score Table

## Conclusion

** Z-score** is an essential statistical tool that

**Its is used in various fields, including finance, education, health, and engineering, making it a versatile method for data analysis. By transforming raw data into a standardized scale, Z-scores facilitate the**

**provides a standardized measure of how a data point deviates from the mean of a distribution.****and the**

**comparison of different datasets****. This standardization is crucial for statistical testing, quality control, and risk management. Understanding how to calculate and interpret Z-scores allows for more effective**

**identification of outliers**

**data analysis and decision-making.**## Z-Score in Statistics – FAQs

### What is the significance of positive and negative Z-Scores?

Positive Z-Scores indicate values above the mean, while negative Z-Scores indicate values below the mean. The sign reflects the direction of deviation from the mean.

**What does a Z-Score of 0 mean?**

**What does a Z-Score of 0 mean?**

A Z-Score of 0 indicates that the data point’s value is exactly at the mean of the dataset. It suggests that the data point is neither above nor below the mean.

### What is the 68-95-99.7 Rule in relation to Z-Scores?

The 68-95-99.7 Rule, also known as the Empirical Rule, states that:

- About 68% of data falls within 1 standard deviation from the mean.
- About 95% falls within 2 standard deviations.
- About 99.7% falls within 3 standard deviations.

### Can Z-Scores be used for non-normal distributions?

Z-Scores are based on the assumption that the data follows a normal distribution. However, in practice, Z-Scores are beneficial for data that follows a normal distribution. While Z-Scores may be calculated for any distribution, their interpretation becomes less reliable and straightforward when dealing with non-normally distributed data.

### How can Z-Scores be applied in real-life situations?

Z-Scores have various applications, such as in finance for portfolio analysis, education for standardized testing, health for clinical assessments, and more. They provide a standardized measure for comparing and interpreting data.

Previous Article

P-Value: Comprehensive Guide to Understand, Apply, and Interpret

Next Article

How to Calculate Point Estimates in R?